 
Archways
The Copley 'Classic' Archway
<< Click for Archway diagram
The Copley 'Classic' Archway gives an elegant decorative
finish to any opening or recess in a wall.It's ingenious design enables it to adapt readily to any
dimensions. It will fit a single doorway - or extend to the
full width of a room by adding straight horizontal
components. Or it can be used as a decorative feature for a
recess. The Copley 'Classic' Archway can be used with or
without side columns - to meet your taste and
requirements.
The span of pairs of the curved components A, B, and C is
about 1 metre,but for a single doorway of less than 1 metre
an attractive pointed arch effect is achieved by trimming
the leading edges back as required. To order, see the
drawing to measure up for your a rchway and then select the
parts you require from the online catalogue. The components
are fixed using Copley Decor Grip adhesive.
The square corner on parts A and B enables you to easily
and accurately locate in the correct position and fills the
space above the curve. ( If fitting to an already arched
opening modify the square section appropriately).
Measure wall thickness. ( Standard is for a 140mm
thick wall. For less, saw or plane edges of inner components
(C and E). For more, add all or part of extra pieces).
Note: the vertical and horizontal components are
identical.
FULLY ILLUSTRATED FITTING INSTRUCTIONS SUPPLIED WITH
PRODUCT.
Click
Here for
blown-up Archway diagram
E-Mail:
mouldings@copleydecor.co.uk
Web: www.copleydecor.co.uk
|
